bskrishna
08-10 11:02 PM
PD may 23 06
ChainReaction
02-02 01:50 PM
You have to apply at HRDC office in the city nearest to where you land. HRDC is Human Resources Development Canada and they issue SIN CARDS. Google it.
Just make note that they are not open on Weekend. You can only apply for SIN on weekday.
You also have to apply for Photo GC which will only be mailed in Canada and someone have to fed ex it to U in US else you will have problem getting back to Canada in future.
Just make note that they are not open on Weekend. You can only apply for SIN on weekday.
You also have to apply for Photo GC which will only be mailed in Canada and someone have to fed ex it to U in US else you will have problem getting back to Canada in future.
sk76012w
07-04 10:23 AM
Rayyan,
Here is my experience. I attended interview at Chennai Consulate on 06/23/08 (H1 approval notice - 2006). Got my passport back in 2 days. No PIMS delay as my info was already in their system. My daughter (H4 approval notice - 2006 and principal applicant is my husband) attended the interview on the same day. However, her info was not available in PIMS. They kept the passport and said it will be sent within a week. I sent an email (to ChennaiNIV@state.gov) on 07/02. They sent a reply asking me to contact them again in 3 days. By God's grace, she received her stamped passport on 07/04.
Now, answers to your questions:
Chennai appointments slots are normally open 3-4 weeks in advance. Make an appointment accordingly.
I think the info is added to PIMS on a routine basis. Making an appointment does not seem to have any effect. If, on the day of your interview, your info is there in PIMS, it is there. Otherwise, you will have to wait till the time they add it.
I normally go to Chennai as that is my regional consulate.
I am not aware of any specific way to make them add your info to PIMS (if it is already not there) before you actually attend the interview.
We have always followed one very successful strategy in all our visa dealings with US consulate namely, PRAY TO GOD.
All the very best for your interview.
Disclaimer: I am not a legal expert on visa stamping procedures or on any of the issues discussed above. These are all my opinions/assumptions only purely based on my experience.
Here is my experience. I attended interview at Chennai Consulate on 06/23/08 (H1 approval notice - 2006). Got my passport back in 2 days. No PIMS delay as my info was already in their system. My daughter (H4 approval notice - 2006 and principal applicant is my husband) attended the interview on the same day. However, her info was not available in PIMS. They kept the passport and said it will be sent within a week. I sent an email (to ChennaiNIV@state.gov) on 07/02. They sent a reply asking me to contact them again in 3 days. By God's grace, she received her stamped passport on 07/04.
Now, answers to your questions:
Chennai appointments slots are normally open 3-4 weeks in advance. Make an appointment accordingly.
I think the info is added to PIMS on a routine basis. Making an appointment does not seem to have any effect. If, on the day of your interview, your info is there in PIMS, it is there. Otherwise, you will have to wait till the time they add it.
I normally go to Chennai as that is my regional consulate.
I am not aware of any specific way to make them add your info to PIMS (if it is already not there) before you actually attend the interview.
We have always followed one very successful strategy in all our visa dealings with US consulate namely, PRAY TO GOD.
All the very best for your interview.
Disclaimer: I am not a legal expert on visa stamping procedures or on any of the issues discussed above. These are all my opinions/assumptions only purely based on my experience.
another one
04-26 11:39 AM
Yes, PR visa is not extendable....Also, you dont have to apply for any PR card when you go to Canada. When you enter Canada, you will automatically be a PR starting that day and the PR will be mailed to the Canadian address you provide at the airport....Its your choice to apply for a SIN card (US equivalent of SSN card)...For this you will have to go to the nearest office to do so. Usually the landing procedure takes 2 to 3 hrs...You can return the same day...PR card is issued for 5 yrs from the date of your landing and you can stay 3 yrs out of Canada...To maintain PR status, you will have to be physically present in Canada for atleast 2 yrs..Hope it works out for you.....
I don't think you really need the physical card. Canadian Immigration officer simply told me that i am a landed immigrant now, the entry stamp and document attached to the passport are enough for me to come and go freely as long as i live in CA for 2 in every 5 years. So there is no additional advantage from giving an temporary address and getting a card.
I don't think you really need the physical card. Canadian Immigration officer simply told me that i am a landed immigrant now, the entry stamp and document attached to the passport are enough for me to come and go freely as long as i live in CA for 2 in every 5 years. So there is no additional advantage from giving an temporary address and getting a card.
more...
vin13
01-07 02:20 PM
Has anyone claimed unemployment benefits in EAD in TX state after being laid off? Can you please tell whats the procedure. I do not want to get into the debate of whether UB can be claimed while in AOS state? I just need to know the procedure. Thanks.
If you just need the procedure and no discussion then why not call the unemployment office in your local area and find out yourself.
If you just need the procedure and no discussion then why not call the unemployment office in your local area and find out yourself.
frost_oni
04-08 03:37 PM
no, the thing is that if you want the text to look good, you're gonna have to draw it yourself. or get some pixel fonts. or use verdana 9pt, and don't forget to alias the text.
more...
akhilmahajan
09-14 06:59 AM
To the brave and fighting. People lets give them a hand of applause.
punjabi
01-13 03:21 PM
Multiple PERM applications can be filed if the employers are different.
I am planning on filing a new PERM as a prospective employee of a consulting firm and also have a PERM filed simultaneously from my current employer..
Has anybody had any experience with this kind of situation, Are there any complications? would this be feasible...pls suggest...
Thanks...
I am planning on filing a new PERM as a prospective employee of a consulting firm and also have a PERM filed simultaneously from my current employer..
Has anybody had any experience with this kind of situation, Are there any complications? would this be feasible...pls suggest...
Thanks...
more...
WeShallOvercome
07-18 12:15 PM
Guys,
Is there a chance of USCIS coming back and saying that they will not take applications for I485 after July 31 2007 for whatever crap reason?
Do you think they will do that after all this noise ?
NO WAY !
Is there a chance of USCIS coming back and saying that they will not take applications for I485 after July 31 2007 for whatever crap reason?
Do you think they will do that after all this noise ?
NO WAY !
StarSun
03-15 09:00 AM
/\/\/\/\/\
more...
hellomms
05-27 03:29 PM
Guys, I have added information in the original thread, please refer to the link below and add your questions, concerns or comments there.
http://immigrationvoice.org/forum/showthread.php?t=18853&page=16#post251110
http://immigrationvoice.org/forum/showthread.php?t=18853&page=16#post251110
harapatta
07-11 04:53 PM
Did you submit any documents for proof of PD
Hello All,
Just received in mail - 2 Year EAD card for me and my wife. Valid till July 2010. I have e-filed myself for both of us. Still waiting for AP docs.
Hello All,
Just received in mail - 2 Year EAD card for me and my wife. Valid till July 2010. I have e-filed myself for both of us. Still waiting for AP docs.
more...
glus
05-06 12:50 PM
Quetions to Gurus. I did read in so many forums since long time but did not get a clear understanding around salary.
1) What is the meaning of "There should not be very huge variance in income levels."
Does it mean while moving from one job to another (1 time)?
2) What if the GC is filed 8 years ago and the person is still waiting but got an average of
10% hike every year. Is that a problem?
Generally speaking: There is NOTHING in the INA nor AC-21 that prohibits one from getting salary increases. As long as you do at your work what is consistent with the approved form I-140, you salary can go up, and in normal circumstances, should go up periodically. I think what the previous member mentioned was that if, for instance, your wage specified on labor and I-140 was going to be 50k/year, u changed employers and is 150k/year, that can raise a question whether or not u do the same thing as u did before, and if your job duties still match with your approved form I-140. Having said that, regular salary changes are not a problem as long as you earn more than the prevailing wage determination. I hope this answers your both questions.
Best Regards,
1) What is the meaning of "There should not be very huge variance in income levels."
Does it mean while moving from one job to another (1 time)?
2) What if the GC is filed 8 years ago and the person is still waiting but got an average of
10% hike every year. Is that a problem?
Generally speaking: There is NOTHING in the INA nor AC-21 that prohibits one from getting salary increases. As long as you do at your work what is consistent with the approved form I-140, you salary can go up, and in normal circumstances, should go up periodically. I think what the previous member mentioned was that if, for instance, your wage specified on labor and I-140 was going to be 50k/year, u changed employers and is 150k/year, that can raise a question whether or not u do the same thing as u did before, and if your job duties still match with your approved form I-140. Having said that, regular salary changes are not a problem as long as you earn more than the prevailing wage determination. I hope this answers your both questions.
Best Regards,
rajeev_74
12-02 12:52 AM
Are you EB3?
more...
kumar_77
06-07 07:16 AM
Ya Thats True , Bill Like This passing will be a major Issue , If some one can get an amendment to set a cap around 30,000 or Get an amendment to set
it as MS degree + 4-5 Years Experience in US = Green Card Then this has a major chance to pass any Thoughts
it as MS degree + 4-5 Years Experience in US = Green Card Then this has a major chance to pass any Thoughts
java4yogi
09-04 12:32 PM
We do have the licence and bank accounts based on the h4 status.
My main question was when we can apply for SSN if the employee is right now in US on H4 visa and Change of Status to H1 is approved. Whether the SSN can be applied before Oct 1 is the main thing !
Thanks for the replies though, might help others in the same boat :)
My main question was when we can apply for SSN if the employee is right now in US on H4 visa and Change of Status to H1 is approved. Whether the SSN can be applied before Oct 1 is the main thing !
Thanks for the replies though, might help others in the same boat :)
more...
rahul2699
05-20 08:01 AM
We are beneficiaries of my husband on a EB3 petition. due to retrogression issue,
and your question is?
and your question is?
mariner5555
01-24 01:48 PM
Hi all,
will appreciate a reply ..I had changed my wifes last name to our married last name (in SSN). her EAD and 485 is in her maiden last name.
will this create an issue when we renew her EAD ? I wanted to renew with our married last name.
Thanks in advance
will appreciate a reply ..I had changed my wifes last name to our married last name (in SSN). her EAD and 485 is in her maiden last name.
will this create an issue when we renew her EAD ? I wanted to renew with our married last name.
Thanks in advance
uma001
02-23 09:30 AM
good to know, thx.
But nowadays nobody is willing to do green card processing as a future employee becos of high unemployment rate
But nowadays nobody is willing to do green card processing as a future employee becos of high unemployment rate
alparsons
January 1st, 2005, 02:22 PM
Hi Gary,
As you discovered strobe is hard to work with for tricky product shots, and glassware can be tricky. I would switch to a floodlight bounced off the ceiling as a starting point. Possibly tinkering with the reflectors to get a little more sparkle in the front would improve it somewhat, as would placing hidden pieces of something to have the transmitted portion of the glass brightened a little. To soften the edge of the highlights try opening the lens to a wider aperature so the reflections are out of focus (gets a little tricky as it probably needs to be stoped down enough to maintain the sharpness of the glass itself.
You probably don't need to spend much on equipment (maybe $5 each for a couple hardware store flood reflectors or a couple bucks for a little more poster board. Maybe 50 cents for a pack of 3x5 cards to cut up to hide behind the glassware , or maybe the gray side of scraps of duct tape might look better)
The basic approach that works best when it must look superb is usualy to lock everything down, shoot it, evaluate, make incremental changes, and reshoot. and sometimes repeat.
As you discovered strobe is hard to work with for tricky product shots, and glassware can be tricky. I would switch to a floodlight bounced off the ceiling as a starting point. Possibly tinkering with the reflectors to get a little more sparkle in the front would improve it somewhat, as would placing hidden pieces of something to have the transmitted portion of the glass brightened a little. To soften the edge of the highlights try opening the lens to a wider aperature so the reflections are out of focus (gets a little tricky as it probably needs to be stoped down enough to maintain the sharpness of the glass itself.
You probably don't need to spend much on equipment (maybe $5 each for a couple hardware store flood reflectors or a couple bucks for a little more poster board. Maybe 50 cents for a pack of 3x5 cards to cut up to hide behind the glassware , or maybe the gray side of scraps of duct tape might look better)
The basic approach that works best when it must look superb is usualy to lock everything down, shoot it, evaluate, make incremental changes, and reshoot. and sometimes repeat.
istrategist
03-19 10:54 PM
First round of interviews went well - now have to send my details to their HR to make sure EB2 porting will work.
However, does filing AC21 (same or similar) cause a conflict with EB2 filing in this case? Should they file and get I-140 approved and then only I should join them?
1. Make sure that your new company's HR and lawyer are comfortable in supporting the fact that new job is same or similar to old job. It is a grey area and you can be the best judge on it.
2. When you join the new employer ask their attorney to send AC-21 letter to USCIS indicating that you have moved to a same or similar job based on AC-21 porting.
3. Filing for H1 or EAD is a personal choice - as far as GC processing goes I don't see a difference in using either.
4. If they are willing and and the position qualifies you to file EB-2 and port PD- sure go ahead.
However, does filing AC21 (same or similar) cause a conflict with EB2 filing in this case? Should they file and get I-140 approved and then only I should join them?
1. Make sure that your new company's HR and lawyer are comfortable in supporting the fact that new job is same or similar to old job. It is a grey area and you can be the best judge on it.
2. When you join the new employer ask their attorney to send AC-21 letter to USCIS indicating that you have moved to a same or similar job based on AC-21 porting.
3. Filing for H1 or EAD is a personal choice - as far as GC processing goes I don't see a difference in using either.
4. If they are willing and and the position qualifies you to file EB-2 and port PD- sure go ahead.
No comments:
Post a Comment